ESU Loksound DCC sound decoder programming/mapping service in UK

ESU Loksound DCC sound decoders

I can offer a ESU Loksound sound programming/mapping service to customers in the U.K.  at an economical rate. I am able to program ESU decoders from V2 to V5 (but not the Loksound Select Direct decoders as these are not reprogrammable with a new soundscape).

I can program any of the locomotive sound profiles available for download from the ESU website ( at a cost 20 UKP per decoder plus insured return postage and, as a premium service, provide bespoke sound profiles assembled from components in the ESU sound library for a cost of 40 UKP per decoder plus insured return postage.

I can program bare decoders and also decoders already installed into 00/H0 16.5mm gauge , TT/H0m 12mm gauge and N/009/H0e 9mm gauge locomotives.

If you wish, you can design your own profiles using the free Windows Lokprogrammer software obtainable from the ESU website and send me a USB memory stick with all the required sound files and profiles for your project along with your loco and required decoder. I will then burn your profile to your decoder for 20 UKP plus insured return postage.

Once your chip has been programmed you will be sent a link to a video file showing it working along with an invoice for payment.

Please note that any existing sound profile on your decoder will be lost because they are not downloadable from the decoder and are written over when the decoder is reprogrammed.

Please contact me via my website,, for details of the service and for contact, postal and payment information.


Below is an ESU Loksound 4 fitted Liliput D16 H0e Gauge locomotive with a custom soundscape programmed by myself.